Onboarding with M365 Location-Based Routing
This section describes how to onboard new customers with M365 Location-based routing. This procedure includes the authentication consent process for a new customer and also the creation of a PSTN gateway and Customer domain using Fully-automatic domain provisioning.
| ➢ | To create a new customer with Location-based routing: |
| 1. | Enter the details of the new customer. |
| 2. | Click Next. |
| 3. | Click here to start the authentication process to allow the Service Provider administrator access to customer Azure tenant. |
| 4. | Enter customer tenant credentials. |
| 5. | Select the Consent on behalf of your organization check box. |
A confirmation is sent from the Service Provider tenant.
| 6. | Configure parameter (see Onboarding with Hosted Pro). |
| 7. | If you above message appears, you need to free a customer license; login to https://www.office.com with the credentials of the Onboarding customer. |
| 8. | In the Navigation pane, select Admin. |
| 9. | Select any user whose license you wish to release. |
| 10. | Right-click and choose Delete user. |
| 11. | Click Delete User. |
The following confirmation is displayed.
| 12. | Return to the wizard and click Reload to reload the license. |
| 13. | Click Next to continue the process of adding the PSTN gateway and DNS customer domain. |
| 14. | Once the Verify and Configure Domain task completed message is displayed, click Back to M365 Scripts link to return to the wizard configuration. Notice that the new PSTN gateway is displayed in the Online PSTN Gateway field. |
| 15. | Select one of the following scripts: |
| ● | M365 onboarding with Location-Based Routing |
| ● | M365 onboarding with Location-Based Routing and Custom Networks. For this option, the following custom variables must be configured |
|
Customer Variable |
Description |
|---|---|
| IP-Network | Internal IP address of the customer network |
| IP-SubnetBits | Subnet mask for the internal customer network interface |
| Trusted-IP-Network | Public IP address of the customer network. |
| Trusted-IP-Subnet-Bits | Subnet mask for the customer Public IP network interface |
| 16. | Enter variable values and then click Next. |
| 17. | Do one of the following: |
| ● | Configure SBC (see Configuring SBC) |
| ● | Complete the wizard to create new customer (see below) |
